Winter comes with glass steam condensation problems, drivers should manage it. In winter, the weather gets cold and humid, resulting in steam condensation. One of the phenomena that raises a kind of anxiety and inconvenience among car drivers. The appearance of steam on the front and rear windshields of the car is problematic. This vapor appears on the outer surface of the car’s glass. In addition, it appears also on the inner surface of the glass. This poses a danger not only to the driver. However, it also threatens the security and safety of passengers and other cars. It known that wiping or cleaning the car early in the morning before driving removes this vapor. And after that the driver can use the windshield wiper. There is also another condition that causes steam to form on the glass from the inside. It is when there is a hole in the car that allows steam to seep into it. This causes unclear vision for the driver. To get rid of the steam outside, it is very easy to use the front windshield wipers. However, for the rear window wiper the driver should ask assistance from someone. The driver needs from time to time to detect what is going on behind the car. To get rid of internal steam, you should use a towel once before starting to drive the-car. This is due to the weak accumulation of steam inside repeatedly. Unless there is a defect in the car, for example a hole, the steam won’t seep in.

Damage to the Spinning Rubber Parts

There is another problem that causes water and steam to infiltrate the car. This causes damage to the rubber plastic pieces located on the edge of the doors. Therefore, these insulating pieces must reviewed from time to time.

It is very important that the car tires like run-flat are able to withstand punctures. This is especially while driving, so that the car not exposed to any problem that compromises safety. That’s why run flat tires designed for this task. These tires have a very high ability to withstand-punctures that they are exposed to while driving on unpaved-roads. These tires can be use after a puncture occurs without returning to a maintenance center. This greatly enhances the safety of the driver, passengers and vehicle. This is actually in contrast to traditional tires, which cannot withstand punctures. And they require immediate maintenance when a puncture occurs. Not only that, traditional tires put the driver, passengers and vehicle at risk. It is because any puncture or other problem in the tire exposes the car to accidents. Run-flat tires have overcome all these problems. Furthermore, they have ideal solutions that include the general safety of the vehicle, the driver and passengers. They, as well as, working to maintain the vehicle’s speed.

Maintain Speed

It is difficult to maintain the speed of a car using conventional tires. When any puncture occurs in these tires, the car’s speed slows down. And it ends up stopping when about sixty percent of the air in the tire is empty. This clarification is if the puncture is in one tire, and the car’s speed slows down more. However, when the puncture is in more than one tire it will become a dilemma. Run-flat tires give you enough time after a puncture occurs. You will probably reach a maintenance workshop and repair the defect. Moving towards the design of both traditional tires and run-flat tires. The former has a tube that works to support the outer tire. Therefore, when this tube affected by a hole, air quickly leaks out. In contrast to this design, there is no tube in run-flat tires. This means that when a puncture occurs in the tire, the air does not find its way out quickly.

There are various autos transmission systems: manual and automatic. Many people have the ability to decide which type of these two options is best for them. In this article, we review the advantages and disadvantages of both different car transmission systems. The difficulty in preferring either system lies in the fact that each has high importance and capabilities. And it is appropriate according to the nature of the lands of the region. For driving in cities, there is no doubt that owning a car with an automatic-transmission is better. First, driving in cities requires this type of transmission for many reasons. First, cities are crowd, so driving characterized by frequent stopping. And for this reason, many car-drivers prefer the automatic transmission because it does all the shifting. Secondly, the automatic transmission reduces a lot of burden on the driver. And the driver only has to press the accelerator and control the car’s braking pedal. In addition, the automatic navigation system is very precise. This means that the system prepares the car’s engine in preparation for acceleration and braking as well. This, in return, helps extend the service life of the transmission and the machine equally. However, the disadvantage of this system is that it is not effective when driving on rough roads.

Manual System

 

 

On the other hand, the manual system has features that not found in its counterpart – the automatic-system. First, this system characterized by a high-control capacity, meaning that everything is under the control of the-driver. When driving on rough-and-muddy-roads, for example, he can control the-use of heavy-gears by pressing the accelerator. This process enables the car to produce greater momentum, enabling it to get out of this muddy road. On the other hand, this system is not effective in cities crowded with cars.

There are different driving modes, but we will highlight the sports mode. Furthermore, this blog will discuss the most important advantages and disadvantages of this style. It known that this pattern greatly increases the engine efficiency. Moreover, it helps the machine to be able to make a powerful explosive launch. The car also makes a loud sound, something that young people and car enthusiasts brag about. This mode increases the engine’s performance to the highest level in terms of horsepower and torque. This enables the car to reach the maximum capacity of the machine. Moreover, this mode increases acceleration speed. Meaning that the car can move to the maximum speed in a very short-period, unlike other systems. It known that acceleration refers to the required-period for car to move from the lowest to highest-speed. It moves from zero to the maximum speed – one hundred kilometers per hour. In addition to the mentioned features, the sports mode works to increase the efficiency of the car’s suspension. This in turn, increases the level of comfort for passengers and the driver. It also increases the efficiency of the suspension has some other benefits – due to its harshness. In other words, when you put the car in sports mode, the friction of the tires with the ground increases. And this is the reason behind the car’s ability to accelerate at a very high speed. It is also the same reason for increasing the efficiency of the car’s ability to turn quickly. However, passengers may become affected by a kind of harshness in driving. This is especially in cases of explosive starts and sudden rapid turns.

Higher Energy Expenditure

In order for the car to perform all these high-level tasks, it requires a higher expenditure of energy. All in all, the sporty mode is fine for those who like it!